What is the size of steel fibers?

The Benefits of Steel Fiber

You will get efficient and thoughtful service from well.

• For the same mixing and construction, there is no need to add equipment or increase the construction cost of metal fibers for concrete due to the low steel fibre cost.

• Under the same strength requirement, metal fibers for concrete can replace steel mesh and reduce the pouring thickness of concrete by 15-25%.

• Improve the construction conditions, mixing vehicles and construction personnel can reach the site directly, and shorten the construction period by 30%. Steel fiber reinforced concrete has high tensile strength, which can prolong the distance between contraction joints and facilitate continuous and rapid pouring of concrete.

• Convenient construction, saving labor, greatly shortening the construction period and saving the total steel fibre cost.

  
  

The Working Principle of Steel Fiber

The working principle of steel fibers for concrete reinforcement involves reinforcing the concrete matrix in three dimensions using steel fibers. These metal fibers, with their specific tensile strength, aspect ratio (length/diameter), and anchorage, play a crucial role in enhancing concrete performance.

By being distributed throughout the concrete, steel fibers effectively restrain the formation of micro-cracks and help redistribute the accumulated stress resulting from applied loads and shrinkage. When cracks do occur, the steel fibers intercept them promptly and inhibit their growth, significantly reducing the likelihood of further crack propagation. This proactive approach ensures that the concrete remains strong and durable, minimizing the risk of structural failure.

The Advantages of SDS- 0.50mm Diameter 30mm Length Hooked End Steel Fiber

• Easier operation and less time-consuming;

• High toughness and lower thickness;

• Integrated, no pores, more efficient;

  Want more information on Crimped Steel Fiber? Feel free to contact us.

• Less time used, and more economical;

• Compared with traditional concrete, concrete with hooked end steel fiber is more economical and efficient.

USER'S GUIDANCE

• Dosage: depend on the application and minimum dosage is 20kg/&#;-70kg/&#;

• Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

• Put the uniformly mixed fiber concrete into the conveyor and transport.

• Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS- 0.50mm Diameter 35mm Length Hooked End Steel Fiber

Star Smith is a professional steel fiber manufacturer that can offer a wide range of steel fibre types that meets different needs.

Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or kg in a pallet, 24tons per 20'container.

And the pallets should be waterproof, don't stack pallets on top of each other.

Gloves and eye protection should be used when adding the steel fibers.