Sep. 30, 2024
Buying train tickets in Europe can seem like an overwhelming experience for first-time visitors. So many ticket options and so many questions. Do you get food on first class trains? Are drinks free in first class on trains? Is 1st class train travel even worth it?
If you want to learn more, please visit our website Yongyang.
You&#;ve got questions about the differences between 1st and 2nd class train tickets, and we've got all the answers to make your train travel experience through Europe a breeze.
The short answer is: a lot.
Before we break down the individual differences that certain carriers offer, you should know that you won&#;t see much of a difference between classes on shorter or regional routes. Similar to air travel, you often get the most perks on longer train routes than you do riding shorter train routes in first-class.
Besides, there&#;s only so much you can eat, drink, sleep, and work on a two-hour ride, anyway.
But on longer routes, you&#;ll have the choice of spoiling yourself with 1st class on these carriers like welcome drinks, luxury seats, and even complimentary Michelin-starred meals.
Image Credit: Getty Images, Oscar Wong. Image Location: St Pancras International Station, London, England, UK
If you&#;re researching carriers for train travel across Europe, Eurostar will sound familiar. It offers service around France, Belgium, the Netherlands, and to London.
Depending on whether you're on a route to and from London or not, the names of the different class options will vary. If you're on a train between Belgium, France, the Netherlands, and Germany (excluding London), the class names are standard, comfort and premium. Trains running to and from London have classes standard, standard premier and business premier.
All passengers receive access to the Eurostar on-board café, free WiFi, and power sockets.
The biggest difference between standard and business premier classes on Eurostar trains to and from London:
You&#;ll say grazie mille to Trenitalia, the Italian national railway that gets you to around all of Italy, including Sardinia and Sicily. It offers standard, premium, business, and executive classes. All classes enjoy free WiFi and access to the FRECCE entertainment portal.
The biggest difference between standard and executive class on Trenitalia trains:
Say oui to train travel through France with SNCF. This carrier is the French national operator and will take you from Lille in the north to Marseille in the south. Both first and second-class tickets include free WiFi, power sockets, and access to the food carriage.
The biggest difference between first class and second class on SNCF trains:
Image Credit: Iryo
Deutsche Bahn is Germany&#;s largest railway company, super efficient, and quite extensive even compared to other European countries. DB offers a standard and a first-class ticket. Both tickets enjoy free WiFi and access to the restaurant car or cafe-bistro.
The biggest differences between standard and first class on DB trains:
Iryo rolled into Spain in , bringing more high-speed routes to Spanish cities and four class categories: Inicial, Singular, Singular Only YOU, Singular, and Infinita. All classes receive free WiFi and 5G, power sockets, access to the onboard entertainment platform, and access to the HAIZEA cafe and Mobile Bar.
The biggest differences between Inicial (the cheapest) and Infinita (the costliest):
Download Trainline&#;s app to compare costs on the lowest-priced tickets available for all classes. Find the ticket you need with the amenities you want and instantly purchase your e-ticket, all without waiting in line at the train station.
Header Image Credit: Getty Images, kruwt. Image Location: River Moselle, Germany
Privately owned multi-system locomotive designed for freight and passenger trains near the Danish-German border. Passenger-km in the five largest countries from to
[
1]
Rail transport in Europe has diverse technological standards, operating concepts, and infrastructures. Common features are the widespread use of standard-gauge rail, high operational safety and a high share of electrification. Electrified railway networks operate at many different voltages, both AC and DC, varying from 750 to 25,000 volts, and signaling systems vary from country to country, complicating cross-border traffic.
The European Union aims to make cross-border operations easier as well as to introduce competition to national rail networks. EU member states were empowered to separate the provision of transport services and the management of the infrastructure by the Single European Railway Directive . Usually, national railway companies were split into separate divisions or independent companies for infrastructure, passenger and freight operations. The passenger operations may be further divided into long-distance and regional services, because regional services often operate under public service obligations (which maintain services which are not economically interesting to private companies but nonetheless produce societal benefit), while long-distance services usually operate without subsidies.
A narrow gauge train at a station in SpainAcross the European Union, passenger rail transport saw a 50% increase between and , as COVID subsided, and reached 245 billion traveled miles. The trend is expected to continue and rapid investments in European Union railways are under way.[2]
[
edit
]
First railway line by countryEurope was the epicenter of rail transport and has today one of the densest networks. Interoperability and high speed rail in Europe are current issues.
[
edit
]
[
edit
]
Overall only about 18% of European cargo moves by railway; in some countries, such as France, the percentage is much lower, but it is much higher in other countries, including Lithuania where over 70% of domestic cargo is transported by train.[3] The relative weakness of rail freight is due to the lower price of truck transport which externalizes a larger share of costs than rail,[4][5][6] as well as the high usage of coastal and inland shipping. By way of comparison, in the U.S., 38% of cargo (by ton-kilometer) moved via rail in , primarily due to external factors such as geography.[7] Similarly Swiss railroads carry about 40% (by ton kilometres) of Swiss domestic freight[8] and even more than 70% of the (mostly international) freight traffic across the Swiss Alps: 74.4% in the first half of .[9][10] The new railway link through the Alps includes the Gotthard Base tunnel, one of the longest tunnels in the world, and was built specifically to shift freight traffic across the Alps from road to rail.[11][12]
[
edit
]
A big problem for long-distance international freight services &#; despite the European Single Market allowing freedom of movement of goods, capital, labor and people and the Schengen area drastically reducing internal border controls &#; is the variety of differing standards for electrification, loading gauge, signaling, driver certificates and even gauge. Finland (Russian gauge), Portugal and Spain (Iberian gauge) use their own broad gauges, as do the Baltic States and several non-EU members (mostly Russian gauge). Rail Baltica is an EU-funded project to provide a standard gauge rail link in and through the Baltic countries, potentially connecting to a Helsinki-Tallinn tunnel. While attempts to unify the divergent standards date back to at least the s with the Conférence internationale pour l'unité technique des chemins de fer (international conference for the technical unity of railroads) in Bern, Switzerland, setting minimum standards for loading gauges (the so-called Berne gauge) and the so-called "Berne space" (the space reserved for railroad workers in buffer and chain couplers[13]), most standards still differ widely between and even within countries as many rules only apply to newly-built infrastructure, as much of Europe's rail infrastructure was built in the 19th century, and upgrading it would be costly and disruptive.
[
edit
]
Another problem is that unlike aviation, where Aviation English is a de facto global standard with few non-English holdouts, rail operations virtually always use the local language, requiring train operators either to be polyglots[14] or necessitating a change of staff at every (language) border. Another impediment to freight rail in Europe is the coupling system commonly used. While the Scharfenberg coupler, a mostly automatic system, is now commonly used on passenger trains,[15] its relatively low limit on the maximum tonnage it can pull makes it unsuitable for most freight operations. While American freight railroads largely use Janney couplers, European freight trains primarily still use buffer and chain couplers, which require railway workers to screw each connection open and shut again during shunting, reducing speed and efficiency and increasing labor cost,[16] though unlike Janney couplers they allow for workers to adjust the slack between railcars.[17] There are plans to replace these couplers with a new digital automatic coupling system, but those have taken longer than expected and are still far from completion.[18][19] A pilot project regarding the digital automatic coupling system was launched by the German Federal Ministry of Transportation in and is to last until .[needs update][20][21]
[
edit
]
If you want to learn more, please visit our website European Standard Rails.
Train lengths in Europe are limited by the size of passing loops and refuge sidings as well as the placement of signals.[22][23] There are plans to allow trains up to 740&#;750 meters long to use the main freight lines by upgrading the requisite infrastructure;[24][25] various construction projects to that end have already been completed.[26][27] 750 meters is still much shorter than the longest trains worldwide; however most European rail infrastructure is not built to allow for longer trains without severe disruption. In addition, longer trains are considered to be more dangerous, as they provide more opportunities for freight cars to derail and make brake applications slower. Therefore, shorter freight trains may be an advantage rather than a disadvantage if safety is the priority.[28]
Double stack rail transport, where two intermodal containers are stacked on top of another, either on flatcars or specifically designed well cars, is virtually unheard of in Europe as the loading gauge of most lines does not allow it. While the Betuweroute in the Netherlands was built with height clearances allowing double stacking,[29] it does not (as of ) connect to any rail line that allows double stacking, and no double stack container trains have ever run along it.
[
edit
]
Unlike countries like United States, where mainline freight rail electrification is nonexistent, a large percentage of European freight trains are electrified. [citation needed]
[
edit
]
The European Railway Performance Index ranked the performance of national rail systems as follows:[30]
[
edit
]
While most railways in Europe use 1,435 mm (4 ft 8+1&#;2 in) standard gauge&#;in some other countries, like on the Iberian Peninsula, or countries which territories used to be a part of Russian Empire and Soviet Union: widespread broad gauge exists. For instance Eastern European countries like Russia, Ukraine, Armenia, Moldova, Belarus, Finland, and the Baltic states (Estonia, Latvia, Lithuania) use a gauge width of 1,520 mm (4 ft 11+27&#;32 in) or 1,524 mm (5 ft) (also known as Russian gauge). In Spain and Portugal 1,668 mm (5 ft 5+21&#;32 in) (also known as Iberian gauge) is used. Ireland uses the somewhat unusual 5 ft 3 in (1,600 mm) gauge, referred to in Ireland as "Irish Gauge" (but is an island with no external cross-border links).
[
edit
]
Likewise, electrification of lines varies between countries. 15 kV AC has been used in Germany, Austria, Switzerland, Norway and Sweden since , while the Netherlands and France use V DC. France and Croatia also use 25 kV AC, Belgium, Italy and Slovenia use 3 kV DC. All this makes the construction of truly pan-European vehicles a challenging task and, until recent developments in locomotive construction, was mostly ruled out as being impractical and too expensive.
The development of an integrated European high-speed rail network is overcoming some of these differences. All high-speed lines outside of Russia, including those built in Spain and Portugal, use 1,435 mm (4 ft 8+1&#;2 in) standard gauge tracks. Likewise all European high-speed lines, outside of Germany, Austria and Italy use 25 kV AC electrification (Electrification of high-speed rail in Italy is mixed 3 kV DC and 25 kV AC). This means that by high-speed trains can travel from Italy to the United Kingdom, or Portugal to the Netherlands without the need for multi-voltage systems or breaks of gauge &#; or they could, if they didn't have to commute from one high-speed line to the next over "classical" lines using a different voltage and/or frequency.
[
edit
]
Multiple incompatible train protection systems are another barrier to interoperability. A unified system, ETCS is the EU's project to unify train protection across Europe. The specification was written in in response to EU Directive 96/48/EC. ETCS is developed as part of the European Rail Traffic Management System (ERTMS) initiative, and is being tested by multiple Railway companies since . All new high-speed lines and freight main lines funded partially by the EU are required to use ETCS Level 1 or Level 2.
[
edit
]
The loading gauge on the main lines of Great Britain, almost all of which were built before , is generally smaller than in mainland Europe, where the slightly larger Berne gauge (Gabarit passe-partout international, PPI) was agreed to in as a general minimum standard (individual lines can and do adhere to larger loading gauge standards) and came into force in .[31][32] As a result, British (passenger) trains have noticeably and considerably smaller loading gauges and smaller interiors, despite the track being standard gauge.
This results in increased costs for purchasing trains as they must be specifically designed for the British network, rather than being purchased "off-the-shelf". For example, the new trains for HS2 have a 50% premium applied to the "classic compatible" sets which will be able to run on the rest of the network, meaning they will cost £40 million each rather than £27 million for the captive stock (built to European standards and unable to run on other lines), despite the captive stock being larger.[33] Similarly prior to the construction of High Speed 1 (then also known as the "Channel Tunnel Rail Link") to continental European standards, the first generation Eurostar trains were required to have several custom modifications compared to the TGV trains they are based on, including narrower loading gauge and provision for third rail electrification as used in southeast England. The successor Eurostar e320 is an almost "off the shelf" Siemens Velaro and is thus incompatible with most of the British legacy rail network but can run on most of Europe's high speed rail network.
[
edit
]
Application of the EU standard heights for new construction; Green = 550 mm, Blue = 760 mm, Turquoise = both, dark gray = New builds in other heights than the EU standardsThe European Union Commission issued a TSI (Technical Specifications for Interoperability) that sets out standard platform heights for passenger steps on high-speed rail. These standard heights are 550 and 760 mm (21.7 and 29.9 in). As the map indicates, there are several areas where 550 mm and 760 mm platform heights overlap and many trains serve stations with platforms of both heights posing challenges for step-free access. Where trains optimized for 760 mm platforms have to serve 550 mm platforms (or vice versa) accessibility is often limited.[34][35][36] Due to path dependency a mixture of platform heights will continue to exist for the foreseeable future.
[
edit
]
Operational high-speed lines in EuropeThe main international trains operating in Europe are:
Additionally, there are a lot of cross-border trains at the local level. Some local lines, like the Gronau to Enschede line between Germany and the Netherlands, operate on the signaling system of the country the line originates from, with no connection to the other country's network, whilst other train services like the Saarbahn between Germany and France use specially equipped vehicles that have a certificate to run on both networks. When there is an electrification difference between two countries, border stations with switchable overhead lines can be used. Venlo railway station in the Netherlands is one such example, the overhead on the tracks can be switched between the Dutch V DC and the German 15 kV AC, which means a change of traction (or reconfiguring a multiple-voltage vehicle) is necessary at the station. On the other hand, an increasing number of locomotives can change voltages "on the fly" without stopping, usually with temporarily lowered pantographs, for instance on the viaduct of Moresnet where freight trains change voltages between Belgian 3 kV DC and German 15 kV 16.7 Hz. A third possibility concerns networks using voltages of the same order of magnitude, such as Belgium (3 kV DC) and the Netherlands (1.5 kV DC): Belgian trains to Maastricht or Roosendaal (Dutch stations located near the border) can use the lower Dutch voltage, albeit with reduced power, on the short stretch from the border to their Dutch terminal station and back. Increasingly the European Union mandates unified standards (see below) for newly built high speed lines to allow smoother international passenger services.
[
edit
]
European rail subsidies in euros per passenger-km for[
37]
EU rail subsidies amounted to &#;73 billion in .[38] Subsidies vary widely from country to country in both size and how they are distributed, with some countries giving direct grants to the infrastructure provider and some giving subsidies to train operating companies, often through public service obligations. In general long-distance trains are not subsidized.
The European Railway Performance Index found a positive correlation between public cost and a given railway system's performance and differences in the value that countries receive in return for their public cost. The and performance reports found a strong relationship between cost efficiency and the share of subsidies allocated to infrastructure managers. A transparent subsidy structure, in which public subsidies are provided directly to the infrastructure manager rather than spread among multiple train-operating companies, correlates with a higher-performing railway system.[30]
The Index found Denmark, Finland, France, Germany, the Netherlands, Sweden, and Switzerland capture relatively high value for their money, while Luxembourg, Belgium, Latvia, Slovakia, Portugal, Romania, and Bulgaria underperform relative to the average ratio of performance to cost among European countries.[30]
[
edit
]
[
edit
]
Liberalization of European passenger rail marketFourth Railway Package attempts liberalization of domestic passenger services in an attempt to reduce European rail subsidies.
[
edit
]
As mentioned above, historically rules and standards on European railroads varied widely and thus the European Union has tried to harmonize and standardize those towards a single common European set of rules. The advent of High Speed Rail added to the "classical" problems of railway electrification standards, gauge, loading gauge and "classical" signaling the additional problem of train protection systems, which are necessary for any train exceeding the speed limit of legacy signaling (79 mph in the United States, 160 km/h (99 mph) in much of continental Europe and 125 mph in Great Britain). Virtually every European country with significant high speed rail ambitions developed its own, incompatible, standard, be it German LZB, French TVM or Italian BACC. As there was resistance to choosing any of the pre-existing systems as a basis for a new European standard the European Train Control System or ETCS was developed and is now mandatory for newly built high speed lines receiving EU funding.[50][51]
[
edit
]
[
edit
]
Contact us to discuss your requirements of Russion Standard Rails. Our experienced sales team can help you identify the options that best suit your needs.
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
All Comments ( 0 )