Jul. 08, 2024
Transportation
When maintaining your tires, inflation is the most important thing to check. Carefully and regularly check the tires on your low bed trailer. Purchase a pressure gauge that you can trust to give you an accurate reading of the inflation level.
Check the inflation after the tires have cooled down. At the heaviest load a low bed trailer can carry, the tires can be inflated to the maximum atmospheric pressure limit. However, this limit should not be exceeded no matter how heavy the load is.
Use valve stem caps to maintain air tightness at all times. Valve caps also help keep dust and moisture out. Even if a tire is properly inflated, its sides may bulge.
Bulging is caused by low tire pressure, which is the worst-case scenario for trailer tires. After checking and inflating your tires, check the pressure again within 48 hours. To avoid crashes, don&#;t forget to inflate your tires in a safe cage.
Due to the increased temperature, the tire pressure will rise when using the tires. It is possible for the pressure to rise as high as 10 or 15 psi. such a high pressure means that the tire is underinflated, overinflated, or the wrong size.
High pressure also indicates that you are driving too fast. When several of these conditions occur at the same time, it can cause inflation to exceed healthy levels.
Always make sure that all drive lines have the right size tires and that the load remains within the specified limits. Don&#;t drive too fast, especially if the trailer is fully loaded.
Make sure the axles are aligned in place. If the wheels are not properly aligned, it can make the road rougher. Because of this, tires wear out faster and more severely.
You know the reasons why tires are under or over-inflated. Make sure you fix the problem before you travel. Don&#;t rely on past inflation records.
You will get efficient and thoughtful service from AUTONE.
Air pressure should be checked with a good gauge before each transport or at least once a week. When checking your tires, don&#;t forget to look for cracked, warped, and rusted rims.
In other words, if the rims are bent or cracked, don&#;t weld them. Instead, repair the rims the way the manufacturer tells you to. If you weld a broken rim, you may cause more damage to the tire and wheel.
Are you looking for a well-built, durable trailer to haul equipment and machinery all across the United States? No matter what you&#;re hauling, it&#;s important that your goods arrive safe and secure. As you know, accidents and damages have the potential to lead to major losses in profits, downtime, reputation, and more.
One of the most common equipment transportation methods is the semi-trailer. This type of trailer is quite advantageous for companies that need to load large items. However, without a drop deck, it is nearly impossible to load oversized pieces.
So, what should you do if you need to haul something so heavy and so large that it can not be easily inserted into a standard semi-trailer?
You get a lowboy.
We&#;re glad you asked! The lowboy trailer is an incredibly useful item in the world of shipping and hauling. Though it&#;s known by many different names from the low-bed to the float, the classic lowboy trailer is easily identifiable with its semi-trailer style and double-level drop system. The deck height of these semi-trailers can be adjusted to drop at the gooseneck (more on that later) or just before reaching the wheels.
Standard flatbed trailers do not feature a double-level drop system and are more commonly used for shipping and hauling standard sized equipment. Lowboy trailers, on the other hand, can haul and carry equipment up to 12 ft in height. A standard two-axle trailer of this kind can haul up to 40,000 pounds. However, you may increase the limit to 80,000 pounds by adjusting the number of axles if needed.
The added capacity of the double-drop deck makes the lowboy trailer an excellent option for hauling heavy machinery and anything that fits neither a flatbed trailer nor a single-drop deck trailer (also known as a step deck trailer). As the deck lowers to near-ground level, oversized items can be more easily inserted into the semi-trailer.
Lowboy trailers can be loaded from the front or behind depending on the design. Some models allow you to place the trailer under the load and lift it.
So, what kind of items are typically hauled in a lowboy trailer?
As we mentioned earlier, many construction, freight, and shipping companies rely on lowboy trailers to ship important items across the country. But how did lowboy trailers come about, and what is their history? Let&#;s take a closer look into the origin of this shipping and hauling essential.
The very first lowboy trailer as we know it today was invented in the s. The early model featured a riveted gooseneck, which hooked to the trucks by the front of the trailer. The back of the trailer had several solid rubber tires and could only be loaded from the rear. Due to this design, any pieces of operable equipment had to be driven onto the deck over the back tires.
In the s, the lowboy got a bit of a facelift. A detachable gooseneck, or removable gooseneck (RGN) was added to make loading much easier in . While the first model could only be loaded from the rear (due to the riveted gooseneck), the new lowboys in town featured the capacity for front loading. Like the detachable trailers of today, heavy equipment is inserted from the trailer. This feature might not sound like much at first, but it actually completely negated the need for loading ramps.
Modern lowboy trailers typically work with hydraulic systems; a hydraulic ram lifts the trailer to meet the unit post-loading. They also include air breaks and are towed by semi-trucks.
You&#;ll find several different options for lowboys out there, and it can be difficult to determine the right one for you. To make deciding easier, we&#;ll review some of the most common types of lowboys and their purposes.
If you want to learn more, please visit our website low bed semi trailers.
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
All Comments ( 0 )