How to hot wash PET flakes?

To produce higher quality PET flakes with PET bottle washing lines, I suggest you can:

If you are looking for more details, kindly visit pet flakes hot washer.

1.Use high-quality raw materials

2.Optimize the washing process

3.Remove contaminants and impurities

4.Use good quality drying equipment

Exactly how should I go about it?

There are several specific key steps that can be taken to improve the quality of the final PET flakes in a PET cleaning line. These include：

I: Accurate sorting and separation of different types of plastic:

It is important to accurately sort and separate different types of plastic before washing. This will prevent contaminants such as labels, adhesives, and other non-PET materials from entering the washing line and contaminating the final flakes.

II: Use of effective washing agents:

The type of washing agents used can have a significant impact on the quality of the final PET flakes. Strong, alkaline-based agents are typically used to remove grease and oil, while acidic agents are effective at removing stubborn stains and discoloration. It is important to carefully monitor the pH level of the wash solution and adjust as needed to ensure that the washing agents are effective without damaging the plastic.

III: Careful control of washing temperature and time:

The temperature and duration of the washing process can also affect the quality of the final PET flakes. Higher temperatures can increase the effectiveness of the washing agents, but can also cause the plastic to become brittle and prone to breaking. It is important to carefully monitor and control the temperature and time of the wash to strike the right balance between effectiveness and product integrity.

IV: Use of filtration and separation techniques:

After washing, the PET flakes are typically filtered to remove any remaining contaminants and debris. This can be done using screens, centrifuges, or other separation techniques. It is important to use the most appropriate and effective filtration method for the specific type and condition of the PET flakes.

V: Proper drying and cooling:

The final step in the PET washing process is drying and cooling the flakes. This is typically done using hot air or infrared heating to evaporate any remaining moisture. It is important to carefully control the temperature and duration of the drying process to avoid overheating and damaging the plastic. The cooled flakes can then be collected and stored for further processing or sale.

Summary

By carefully following these steps, it is possible to improve the quality of the final PET flakes in the PET bottle washing line. This can help to maximize the value of recycled plastic and ensure that it is suitable for use in the production of new PET products.

Why you need to produce higher quality PET flakes with PET bottle washing line?

PET, or polyethylene terephthalate, is a type of plastic commonly used in the manufacture of products such as bottles and packaging materials. The recycling process for PET involves collecting and sorting used plastic, followed by washing and drying to remove contaminants and impurities. The resulting flakes can then be used as raw material for the production of new PET products.

Improving the quality of PET flakes in the PET washing line is essential for maintaining the integrity and value of recycled plastic.

Because the quality of the PET flakes has a direct impact on the quality of the final products made from the flakes.

High-quality PET flakes are free of contaminants and impurities, which can affect the performance and durability of the products made from the flakes.

In addition, high-quality PET flakes are more valuable and can fetch a higher price on the market, making it a more profitable process overall.

What is high quality PET flake? What are flake quality standards?

High-quality PET flakes are free of contaminants and impurities, and have a consistent size and shape.

There are no specific industry-wide standards for high-quality PET flakes, but generally speaking, the flakes should be free of any visible contaminants, such as dirt or debris, and should have a consistent size and shape that is suitable for use in the intended application.

In addition, the flakes should be free of any contaminants that could affect the performance or durability of the final products made from the flakes.

How much does it cost to set up a PET bottles washing line?

The cost of setting up a PET bottle cleaning line can vary depending on a number of factors, including the size and capacity of the line, the type of equipment used, and the location of the line.

The company is the world’s best waste plastic crushing washing recycling line supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

In general, the cost of a small-scale PET bottle washing line can range from a few thousand dollars to tens of thousands of dollars, while a large-scale washing line can cost hundreds of thousands of dollars.

It is important to carefully research and compare the costs of different washing lines before making a decision to ensure that the line you choose fits your needs and budget.

What equipment is included in a complete PET bottle washing line?

1. A conveyor system to transport the PET bottles from one step of the washing process to the next
2. A sorting and inspection station with metal detectors to remove any damaged or contaminated bottles from the washing line
3. A series of washing machines like friction washer to clean the PET bottles and remove any plastic labels, glue, or other contaminants
4. A plastic bottles crusher machine
5. A rinsing station to rinse the washed bottle flakes with clean water
6. Hot washer to sanitize the bottle flakes and remove any remaining contaminants
7. A drying station to remove any remaining moisture from the flakes to get the dry pet flakes
8. A flake sorting and inspection station to remove any contaminants or impurities from the flakes and to ensure that they meet the required quality standards

Some PET bottle washing lines may also include additional equipment such as color or material sorters to further sort PET bottle flakes for color and to further reduce non-PET plastic flakes in order to further improve the quality of the final PET flakes.

The specific equipment included in a PET bottle washing line will vary depending on the needs and requirements of the individual washing line.

How can high quality recycled PET flakes be utilized?

High-quality PET flakes can be used in a variety of applications, including the production of new PET bottles, as well as other plastic products such as films, sheets, and producing polyester staple fiber.

PET flakes can also be used as a raw material in the production of other products, such as carpets, clothing, and automotive parts.

In addition, PET flakes can be recycled and used to create a variety of other products, such as plastic lumber, furniture, and packaging materials.

The specific use of high-quality PET flakes will depend on the quality of the flakes and the requirements of the end product.

How it works

PET flakes are fed into the PET flakes hot washer where they sink down to the bottom. After the material accumulates to certain amount, they are lifted up on a vertical auger with paddles for discharge. The paddles create strong friction between the materials whereby they are cleaned. The finished product is higher quality PET flakes you can sell for more money.

Applications

The waste PET bottle hot washer is the newest washing machine for the PET bottle recycling line for 2018, this hot washing machine uses hot washing to remove labels and glue away from the bottles. It’s especially useful for washing oil and sand away. You can also add caustic soda and other cleaning chemicals into tank to make the raw material cleaner.

The hot washer for plastic washing recycling line is made up of the body, motor system, washing system, draining system and heating system.

Additional Images

Place an Order

The general lead time for all single-piece, standard equipment orders is 30 days. For custom orders or complete washing lines, the lead time is between 60 – 90 days. The actual lead time will depend heavily on the complexity of the project as well as the amount of machinery we have in queue at the time of your order.

Contact us to discuss pricing and ordering details. Here is a brief summary of our ordering procedures.

Related Machinery

If you want to learn more, please visit our website pvc cable crushing washing line.