Jun. 24, 2024
This guide is designed to be friendly and knowledgable and to provide options for different people from all settings and backgrounds. Whether you're a first-time PVC builder, who has never picked up any tool, or a seasoned PVC enthusiast or maker who uses PVC in everyday ideas and activities, this guide should provide a general manual for cutting PVC pipe products.
The company is the world’s best skirting pvc supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
First, we'll cover all the basics, like general safety instructions. Then we'll get into what tools are available to cut PVC pipe; then, we'll show examples of how to use each tool or method to cut PVC pipe. Finally, we'll discuss additional techniques for finishing up the cutting PVC pipe process and cleaning up and what tools should never be used.
If your questions are not addressed here, feel free to contact our support team at . We'll be glad to help.
Compared to wood and metal, PVC has many methods to cut it into manageable and necessary sizes for a project.
PVC cuts extremely easy. Other materials take a long time to cut using standard hand tools. PVC, on the other hand, does not. This is because PVC only requires that, like metal, you cut the outside diameter of the pipe. While wood and metal leave behind splinters or metal filaments which can become cumbersome, PVC only leaves behind small traces of plastic particles, which can easily be cleaned up by hand without injury.
What is the best way to cut PVC pipe? We'll leave that up to you. Much of it depends upon your need and your budget. Read through our options below and determine your ideal way to cut PVC pipe.
DISCLAIMER: The information provided within this manual is for informational purposes only. FORMUFIT accepts no responsibility and is excluded from all liability for damage and loss that any other party may suffer as a result of using or in connection with such use or loss of use of this information, including but not limited to loss of profit, loss of opportunity, loss of business, indirect damages, incidental damages, special or consequential loss, injury or loss of life.
As with any manual involving tools, especially cutting or drilling, safety needs to be discussed.v
Every method to cut PVC pipe involves tools that use a cutting blade of some type. Each of these tools can cause serious harm to an individual if not used properly. Be sure to read, understand, and follow all the safety rules for your hand or power tools. Failure to do so could cause bodily harm.
Always be aware of where your hands are when cutting PVC pipe with any tool, be it manual or power. Always clamp, and never hold PVC pipe when cutting with a saw.
Wear safety glasses, goggles, or other eye protection when cutting PVC pipe, as pipe fragments can be ejected from the area being cut. This is particularly important when using power tools.
Wear a mask or respirator. When cut, PVC pipe can emit small particles that irritate the lungs or throat. PVC, when heated to its melting point, can also emit chlorine gas, which with long-term exposure, can be dangerous.
CAUTION: Be sure to clamp all PVC pipe with a vise, C-clamps, or quick-release clamps. Do not attempt to hold the pipe steady with your hands, as injury may result.
Using a tape measure and a marking tool such as a pencil, mark the point at which you want to cut the PVC pipe.
As mentioned before, clamp the pipe to a solid surface such as a table. If using a miter box, be sure the box is secured to a table. You can use a vice, C-clamps, or quick-release clamps to secure the pipe to either the table or the miter box.
Before you begin sawing, ensure that the hacksaw's adjustment nut(s) is hand-tight. Do not over-tighten. A loose blade will cause the cut to wander and not make a straight, even cut down the diameter of the pipe.
Place the rear of the hacksaw blade on the cut mark, then draw it backward to create a notch in the PVC pipe. This can be repeated until there is a defined but clean notch in the pipe. This notch will guide all subsequent movements and make it easy to glide the saw back and forth without bouncing along the surface of the pipe.
Begin cutting with a back-and-forth motion SLOWLY, ensuring the cut is straight as the hacksaw cuts further into the pipe. Let the saw do the cutting. Cutting too quickly at this point will make the saw wiggle and take you off the course of a clean cut.
When you reach the bottom of the pipe, slow down on the sawing motion and complete the cut smoothly and easily at an angle to avoid a 'blowout' of the edge of the pipe.
CAUTION: Take breaks between frequent cutting to avoid hand fatigue.
Using a tape measure and a marking tool such as a pencil, mark the point at which you want to cut the pipe.
Hold the pipe in one hand with the mark you made facing up, and place the pipe inside the pipe cutter mechanism. Ensure the cutter's blade is on the cut mark you made.
Contact us to discuss your requirements of pvc wall skirting. Our experienced sales team can help you identify the options that best suit your needs.
Related links:Grasp the handle with pressure, then slowly rotate the pipe cutter around the pipe, ensuring that you remain straight. If the pipe cutter begins to make a 'spiral' and goes off to the left or right, restart the cut, and attempt to keep it straight (this is usually caused by gripping too hard).
Once you have made one pass around the entire pipe, apply additional pressure and repeat the rotations around the pipe until it is cut through completely.
CAUTION: Take breaks between frequent cutting to avoid hand fatigue.
Using a tape measure and a marking tool such as a pencil, mark the point at which you want to cut the pipe.
As you open the handles of the ratchet-style pipe cutter, the blade will also lift. Open the pipe cutter handles completely so that you can fit your pipe in between the blade and the jaw of the pipe cutter.
Hold the pipe in one hand with the mark you made facing up, and slide the pipe between the blade and lower jaw. Place the blade of the pipe cutter on the mark and squeeze the handles until they come into contact.
Grasp the handle with pressure until the blade meets the mark, then release the handle and repeat to use the ratcheting action. Continue ratcheting down onto the pipe until you are completely through the pipe and it separates into two segments.
CAUTION: Miters saws can be extremely dangerous and can cause fatal injuries if improperly used. Be sure to read and understand the instructions for your miter saw. Failure to do so could cause bodily harm, or even death
Using a tape measure and a marking tool such as a pencil, mark the point at which you want to cut the pipe.
Line up the cut mark you made in the previous step on the miter saw throat plate.
Secure the pipe to the miter saw table with clamps to the miter saw fence. NEVER USE YOUR HANDS. Using a pipe clamp with a curved face may be more practical to hold the pipe in place properly.
Pull the switch trigger and slowly bring the miter saw arm down into and through the pipe. Bring the miter saw down through the entire pipe, then release the switch trigger. Allow the blade to stop spinning before removing the pipe or raising the blade.
When using hand saws, such as hacksaws, the back-and-forth motion of the saw will often create a blowout at the end of the inside of the pipe, known as burrs. These are small bits of PVC plastic that are created when the sawing action is performed.
The burrs can be annoying, scratch items, and make a general mess when handling the PVC pipe. You can remove the burrs to alleviate any post-cutting mess and to keep things clean.
To de-burr the end of the cut PVC pipe, you can use one of three methods:
Several methods are not recommended to cut PVC pipe. Despite the obvious, many people believe that cutting PVC is just like cutting wood and that PVC can be cut using the same tools and in the same manner. This is not true, as wood and PVC have completely different characteristics.
It is not recommended to use any power cutting tool where the user moves the pipe INTO the blade, also known as static or fixed blade tools. This is due to the curvature of the PVC pipe and the difficulty in successfully maintaining a secure hold onto the curved pipe. Additionally, the curvature causes the saw to come into contact at different points on the curved pipe and may make the blade 'bounce' off the pipe, producing undesirable results or injury.
Some examples of non-recommended power tools are table saws (the PVC pipe can cause kickback) or band saws (bandsaws are notorious for chipping pipe that is old and brittle).
It is recommended to use power tools where you secure the PVC pipe to a surface with clamps and move the blade into the pipe, such as miters saws, or in some cases, even jigsaws or circular saws.
Standard wood saws are not recommended as they don't produce the accurate results that a hacksaw does. Hacksaws have a much thinner blade and cut more precisely, whereas wood saws have large teeth and a thick blade.
The larger teeth of the wood saw do not properly allow a good perforation into the pipe and can cause more work than necessary.
If you've read this guide and still have questions, feel free to contact us. We are constantly revising our documents and website with information provided by users just like you.
If you want to contact us with questions or suggestions, please them to
We've got a lot more guides where this one came from, which are available at formufit.com/pages/guides/.
If you want to learn more, please visit our website skirting for kitchen.
Previous: Everything You Need To Know To Find The Best pvc wall corner
Next: 4 Tips for Choosing PVC High Gloss Wood Grain Edge Banding for Furniture
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
All Comments ( 0 )