An Inside Look at the Bolt Manufacturing Process

Bolts are one of the most common fasteners used in engineering, manufacturing, and construction processes. While some are simple in design and can be manufactured with relative ease, others are more complex (in shape, size, etc.) and call for a more complicated manufacturing process. Regardless, the ways bolts are manufactured are important to understand because they play a larger role in how well the parts perform. 

Read more

In this article, we&#;ll discuss a few general methods of bolt manufacturing, as well as give you an inside look at the step-by-step process we use to manufacture a bolt here at Wilson-Garner. 

How Is a Bolt Made? 3 Common Methods

Before diving into a real-world bolt manufacturing example, let&#;s first recap the three most common methods of manufacturing bolts: cold forming, hot forging, and machining.

• Cold forming

  (AKA cold heading) is the process of forming a bolt without heating up steel. This is done by striking or pressing the material within a form.

• Hot forging

  is the process of heating up steel to a point where it becomes malleable, then forming it in a die.

• Machining

  is the process of cutting away steel to fit desired bolt dimensions. 

Each of these methods has its own advantages and disadvantages, so one may be more suitable for a particular application than another. For instance, we typically use cold forming at Wilson-Garner because it suits materials like alloy and carbon steel wonderfully and strengthens them through a process called &#;work hardening.&#; 

Read more about these common bolt manufacturing methods here. 

The Bolt Manufacturing Process: A Step-by-Step Guide

Now let&#;s look at one of these bolt manufacturing processes in action. As we mentioned above, we primarily use cold forming at Wilson-Garner, so we&#;ll use a cold-formed bolt as an example. 

The bolt we&#;ll look at here is a hex flange bolt with a 1&#; diameter. It&#;s made of alloy steel. Here are the seven steps we take to manufacture it, along with pictures from throughout the production process. Keep in mind that this is a part that requires a few more steps in the production process than others due to its shape and diameter. 

1. Cutoff

Our team takes bars of steel and cuts them to length. 

2. Extrude

This is our first hit. We strike each piece of cut material (one at a time) within a large press to reduce the diameter on one end to the pitch diameter that is specified. That&#;s where the threads will be formed in a future step.

The other end (with the larger diameter) is where the bolt&#;s head will be. During this step, it gets a small increase in diameter to prepare for the next hit.

3. Upset

This is our second hit, where we strike the material within the press again (also one at a time). The goal here is to enlarge the bolt&#;s head end, so it&#;s ready for the final hit that will form it. The material doesn&#;t typically flow well enough to form the head in just one hit. 

If you want to learn more, please visit our website yiyuan.

4. Headed

This is our third hit, which is also done one at a time in a press. The hex, flange, undercut, and head markings are all formed during this stage.

5. Trimmed

This is our fourth and final hit. It&#;s done in a trimming press, one at a time. This is when the flange is trimmed, making it straight and round. 

6. Rolled

During this stage, we roll the bolt&#;s threads. While some manufacturers may choose to cut threads, we stick with thread rolling at Wilson-Garner. Rolled threads are typically more durable, accurate, and resource-efficient. 

The threads are added using a reed roller, again one at a time. This is a very intensive part of the bolt manufacturing process. 

Once the threads are all rolled, the bolt is dimensionally done and ready for final dimensional inspection. This is when our team ensures all the dimensions are in tolerance. 

7. Finished

During this stage, we send the bolt (and all the others in the order) off to a partner for heat treatment, blasting, and zinc plating. We don&#;t do in-house finishing or plating at Wilson-Garner.

After the bolts have been heat-treated, blasted, and plated, we get them back, and they&#;re almost finished. But before they&#;re ready to pack and ship, we re-roll the threads one more time. This is to remove any nicks or burrs that may have been added in the heat treat or plating process, and to ensure that the threads gauge properly. 

From there, the bolts go through one final inspection to ensure everything is as it should be. Then it&#;s time to pack and ship!

Looking for a Quality Bolt Manufacturer? Choose Wilson-Garner.

Wilson-Garner is your trusted source for high-quality, custom fasteners in limited-run quantities. Our production and testing processes ensure you get the exact fasteners you need, every time. If you need a bolt, screw, or stud manufactured to your specifications, please reach out! We&#;d love to discuss how we can help.

In the previous post we had discussed the various materials that can be used in the manufacturing process of bolts, screws, and fasteners. We also explained the preferred manufacturing methods and processes.  In this post we shall take a look at some other options.

The Optional Four Steps in Fastener Manufacturing

These steps comprise complicated specialized processes to achieve specific results.  However, we will explain each option briefly:

1. Heat Treatment: This process is performed to increase the overall durability of the screw or bolt. There are two operations within heat treatment:
   1. Hardening: Here, the fasteners are heated to a high temperature (about oF), and then dipped into a cooling media (usually water). This sudden change in temperature hardens the bolt or screw material.
   2. Tempering: This operation is performed to reduce some of the excess hardness/brittleness of the fastener. The metal is heated to a temperature level below its critical point after which the screw is left to air cool.

2. Surface Finishing: This process includes operations that are performed to alter the surface of the bolt or screw. It is done to enhance its function and aesthetic appeal. Surface finishing can include:
   1. Knurling: A lathe is used to create crossed, angled, or straight lines into the metal.
   2. Burnishing/Reaming: A tool is passed along the body of the fastener in a sliding motion. This motion helps enhance the aesthetics of the fastener&#;s surface finish.
   3. Grinding: A grinder is used to remove any imperfections from the screw to make the surface flat, smooth or even reflective. 

3. Thread Forming and Rolling: Bolts and screws need to be threaded for many applications. Thread forming or cutting is performed to create threads on the inside or outside of the fastener. Thread rolling operations are performed using thread rolling dies, which form various thread sizes on a part without removing material. The die is placed against the area where the threading needs to be made. The fastener is moved in a circular motion, allowing the die to create perfect threads around the body at precise locations. 

4. Protective Coating: The last step involves coating the screws and bolts with a protective coating. This prevents the fasteners from rust or corrosion, and can change the appearance by adding color. 

After all these steps have been completed the custom machined fasteners are then sent for testing and inspection. They are checked for their hardness levels, threading accuracy, impact and tensile strength, torque levels, coating thickness, and mating fit.  If they pass all these tests, they are then packed and shipped for delivery.

Are you interested in learning more about Fasteners Manufacturer? Contact us today to secure an expert consultation!